DETAILED SPECIFICATIONS

Below are the detailed specifications of the Ford Racing Puma. Simply click on the image to view the full specification and detailed write up for each area of the car.

EXTERIOR

Exterior changes included the fitting of wider aluminium front wings, steel rear quarter panels, the wider arches housed larger 17"x7.5J alloy wheels...

DRIVETRAIN

Power was sent to the front wheels through an IB5 gearbox. Wider front wishbones increased the front track by 33.7mm per side, specific longer driveshafts were fitted...

INTERIOR

Interior changes were limited due to budget constraints to the project but included Sparco front bucket seats trimmed in blue Alcantara with matching trim work to the rear...

SUSPENSION

Suspension and handling is where the Ford Racing Puma shines. Eibach uprated shock absorbers and springs were fitted all round...

ENGINE

1.7-litre 16V Zetec SE featured revised camshafts, inlet manifold and exhaust system. Revised engine management would allow for 7,250RPM...

BRAKES

Alcon 4 pot motorsport derived front brake calipers, 295x28mm ventilated front discs and rear disc brakes gave the Ford Racing Puma 1.1G of stopping power...